Matek Mini Power Hub w/BEC (5V and 12V)

MATHUB5V12V

New product

Out of Stock

Matek Mini Power Hub w/BEC (5V and 12V)

More details

Price

7,90 €

  • Matek Mini Power Hub w/BEC (5V and 12V)

    The Mini Power Hub has been engineered to provide the highest possible performance and reliability in a 36*36mm and 4 layer PCB. The Hub distributes power from a battery pack to 4 ESCs, as well as, providing synchronized and regulated DC outputs for powering camera’s, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPoly. The hub also features convenient solder bridge of various voltage for camera and video TX.
    This Power Distribution Board makes a great addition to your multi-rotor.

    Features:
    - 2oz copper & 4-layers PCB.
    - ESC & Battery solder tabs in pairs.
    - Solder Bridges of various voltage for Camera & VTX.
    - DC/DC synchronous buck regulator, Efficiency is up to 95%.
    - TVS(Transient Voltage Suppressor) protection for DC/DC chip.
    - 5V & 12V Output LED indicators & Short circuit tolerant.

    Specification:
    General:
    - Input voltage range (2S-6S operation): 7.2 - 26VDC
    - Regulated 5V and 12V outputs
    - LED power indicators ( 5V & 12V outputs )
    - 4 ESC outputs

    ESC outputs:
    - Continuous current: 20A per output
    - Peak current (10 seconds/minute): 30A per output

    BEC 5V output:
    - Designed for RC Receivers, Flight controllers, OSD, and Servos.
    - Voltage: 5.0 +/- 0.1VDC
    - Continuous current: 3 Amps
    - Short-circuit tolerant (10 seconds/minute)
    - LED (indicates voltage is in regulation, within 10%)

    BEC 12V output:
    - The battery should be 4S~6S LiPo
    - Standard output designed to power cameras and video transmitters,etc.
    - Voltage: 12.0 +/- 0.2VDC
    - Continuous current: 2 Amps (Max.3A 10s/minute)
    - Short-circuit tolerant (10 seconds/minute)
    - LED (indicates voltage is in regulation, within 10%)

    CAM & VTX voltage bridge
    - 3S operation. choose “VCC” for 12V camera & 12V VTX, VCC=Battery Voltage.
    - 4~6S operation, choose “12” for 12V camera & 12V VTX
    - 3~6S operation, choose “5” for 5V camera
    - Video pass through from the “CAM” pad to the “VTX” pad

    Description:
    - Dimensions: 36 x 36mm
    - Weight: About 6g
    - Mounting holes 30.5mm square spacing

    Package Included:
    1 x Matek Mini Power Distribution Board